Spare parts for standby generators and CHP plants
Eurolog GmbH in Zug, Switzerland, sources spare parts for diesel standby generators and for combined heat and power plants. The graphic shows where these parts sit on the plant. We deliver throughout Switzerland and abroad.
In the exhaust line these are the stainless steel exhaust expansion joint (also called bellows), flanges to EN 1092-1 and the exhaust silencer. Gas engines also have an oxidation catalyst. In the crankcase breather a knitted wire mesh demister retains the oil droplets. A coalescer insert captures fine oil mist. For lubricating oil we source filter elements to the manufacturer’s part number. Metal hoses and rubber expansion joints absorb engine vibration. The stop solenoid shuts the diesel engine down.
For a quotation, a photo of the nameplate, a drawing or the dimensions of the old part are enough. We reply within 2 working days. The delivery time is stated in our quotation. Send enquiry
The parts on the plant in detail
Exhaust gas
Stainless steel exhaust expansion joint
The stainless steel bellows absorbs the thermal expansion of the exhaust line. It also keeps engine vibration away from the pipework.
- Bellows material
- 1.4571
- Nominal sizes
- DN 80 to DN 1100
- Certificate
- 3.1 to EN 10204, on request
- For the quotation
- Nominal size, overall length, connection type, temperature, quantity
Expansion joints
Connection
Flanges to EN 1092-1
The loose flange turns freely on the collar. This allows the bolt holes to be aligned during installation. We also supply flanges fitted to the expansion joint.
- Nominal sizes
- DN 10 to DN 1200
- Pressure ratings
- PN 2.5 to PN 40
- Materials
- steel and stainless steel
- For the quotation
- Nominal size, pressure rating, type, material
Flanges
Exhaust gas, gas engines
Oxidation catalyst
The catalyst reduces carbon monoxide and formaldehyde in the exhaust gas. This step applies to CHP plants with a gas engine. In these plants the catalyst sits at this point of the exhaust line.
- Coating
- platinum and palladium
- Dimensions
- to the dimensions of the old element
- Old catalyst
- take-back on request
- For the quotation
- Engine type and output, diameter and length of the old element, emission limits
Catalysts
Exhaust gas
Exhaust silencer
The silencer reduces the noise before the exhaust gas reaches the open air. The noise arises because the engine expels the exhaust gas in short pulses. Back pressure on the engine should stay low.
- Material
- stainless steel 1.4301 or 1.4404
- Inlet
- axial or lateral
- Dimensions
- to the dimensions of the old silencer or sized to your data
- For the quotation
- Engine, noise level, connection, dimensions of the old silencer
Exhaust silencers
Oil mist
Demister in the oil mist separator
The knitted wire mesh pad retains the larger oil droplets from the crankcase breather. They coalesce on the wires and drain off.
- Materials
- 1.4301 or 1.4404
- Separation efficiency
- typically above 99 per cent for droplets from about 5 to 10 µm, with correct sizing
- Installation
- support grid and hold-down grid
- For the quotation
- Vessel diameter, medium, volume flow, temperature
Demisters
Fuel
Metal hose in the fuel line
The annularly corrugated hose absorbs engine vibration. It also compensates for misalignment during installation.
- Nominal sizes
- DN 6 to DN 300
- Hose material
- 1.4541 or 1.4404
- Braid
- none, single or double
- For the quotation
- Nominal size, length, medium, pressure, connections
Metal hoses
Lubricating oil and breather
Filter element and coalescer insert
Both parts fit their existing housings. The filter element cleans the lubricating oil. The coalescer insert captures the fine oil mist that passes through the demister.
- Filter element
- equivalent, to the manufacturer’s part number
- Coalescer insert
- knitted mesh, also with glass fibre
- Dimensions
- to the dimensions of the old part
- For the quotation
- Part number or dimensions, photo of the nameplate
Filter elements Coalescers
Cooling water
Rubber expansion joint
The rubber bellows isolates the vibrating engine from the cooling water pipework. It also dampens structure-borne noise.
- Bellows
- EPDM or NBR with fabric reinforcement
- Media
- water and cooling water
- Connection
- loose flanges
- For the quotation
- Nominal size, overall length, medium, temperature
Expansion joints
Control
Stop solenoid
The stop solenoid acts on the injection pump and shuts the diesel engine down. Depending on the circuit, it is energised to do so or it operates when the supply fails.
- Voltages
- 12 V and 24 V DC, 230 V
- Duty cycle
- intermittent or continuous duty at 100 per cent
- Replacement
- from a photo or the nameplate
- For the quotation
- Nameplate, voltage, stroke, mounting
Solenoids
Frequently asked questions
Which spare parts for standby generators does Eurolog source?
Exhaust expansion joints, flanges, exhaust silencers, demisters, metal hoses, filter elements, coalescer inserts, rubber expansion joints and stop solenoids. For gas engines we also source oxidation catalysts.
What does Eurolog need for a quotation?
A photo of the nameplate, a drawing or the dimensions of the old part are enough. We reply within 2 working days. The delivery time is stated in our quotation.
Do the parts also fit combined heat and power plants?
Yes. Most of these parts are also found in combined heat and power plants. The oxidation catalyst belongs to plants with a gas engine.
Is there a certificate for the parts?
On request we supply an inspection certificate 3.1 to EN 10204.
Where does Eurolog deliver?
We deliver throughout Switzerland and abroad. Eurolog GmbH is based in Zug, Switzerland.