- Sourcing industrial components from our base in Zug, Switzerland, since 1998.
Expansion joints, demisters and spare parts for industrial plants
One point of contact in Zug for quotations, sourcing, customs clearance and delivery
Eurolog GmbH has been sourcing industrial components and spare parts for plants in Switzerland and abroad since 1998. They include expansion joints (bellows), knitted wire mesh and demisters, filter elements, flanges, metal hoses, solenoids, exhaust catalysts, silencers and coalescers. We work directly with manufacturers and handle customs clearance. Now run by the third generation.
Sourcing direct from the manufacturer
We source industrial components directly from manufacturers, including items outside standard ranges. For older parts we look for the original part or have a replacement made to sample.
- Transport and customs clearance arranged
- Access to manufacturers and specialists
- Reply within 2 working days
What you can expect from us
We source industrial components from manufacturers and deliver them to customers in Switzerland and abroad. We state the delivery time in our quotation.
Experience since 1998
Certificates and clear information
For small and large companies
We supply workshops, plant engineering companies and large industrial firms. We source single parts as well as series quantities.
Industrial components and spare parts at a glance
Metal, rubber and fabric expansion joints decouple vibrations and absorb thermal expansion. For quiet, leak-tight and durable pipework.
- Applications: Power plants, chemical plants/refineries, HVAC, marine, turbine/boiler lines, pump/compressor connections.
- Variants: Axial, lateral, angular, universal (with tie rods), multi-convolution; internal sleeve (liner) optional; materials e.g. 1.4571/1.4404, PTFE/elastomer and fabric layers.
- Standards: Design to EJMA; selection by medium, temperature, pressure and movement.
Exhaust silencers for combined heat and power (CHP) plants and emergency generators, matched to the connection dimensions of your plant.
Use: Exhaust lines of gas and diesel engines in CHP plants and emergency generators.
Design: Matched to engine output, exhaust gas flow and required attenuation.
Quotation: Send the data sheet or dimensions of your existing silencer and we will prepare a quotation.
Variants: Filter elements equivalent to the original; knitted mesh sleeves with or without glass fibre; knitted stainless steel tapes.
Use: Hydraulics and lubrication, manufacturers of particulate filters, engines and plants.
Quotation: Send the OEM part number and annual requirement and we will prepare a quotation.
Knitted wire mesh separator inserts remove fine liquid droplets from gases and vapours.
Construction: Stainless steel mesh, also co-knitted with glass fibre, PTFE or polypropylene, made to the dimensions of your separator.
Use: Fine droplets in gases, oil-water separation, compressors, exhaust air and process plants.
Quotation: Send the dimensions or a photo of the existing insert and we will prepare a quotation.
Replacement catalysts for gas engines in CHP plants, made to size or to sample.
Construction: Oxidation catalysts made to the dimensions of your existing catalyst.
Use: CHP plants and stationary gas engines.
Quotation: Send the nameplate details, dimensions or a photo and we will prepare a quotation.
Variants: DN 10 to DN 1200, PN 2.5 to PN 40; steel S235JR and P265GH, stainless steel 1.4541 and 1.4571.
Standards: EN 1092-1, inspection certificate 3.1 to EN 10204 on request.
Use: Exhaust lines and pipelines, expansion joints, metal hoses, plant engineering.
Linear solenoids and stop solenoids for valves, interlocks and engines.
Applications: Valves, interlocks, shutdown of diesel and gas engines.
Design: Matched to force, stroke, duty cycle, voltage and IP rating.
Quotation: Send the nameplate details or data sheet of the existing solenoid and we will prepare a quotation.
Applications: Demisters/mist eliminators, filtration/de-misting, vibration/shock damping, EMI/RFI shielding.
Properties: Large surface area, low pressure drop, corrosion-resistant alloys.
Forms: Pads, roll stock, made-up inserts, sealing profiles.
Variants: DN 6 to DN 300, with or without braid, up to 550 °C; flange, threaded or weld connection.
Testing: Pressure and leak test before delivery, certificate to EN 10204 on request.
Use: CHP plants, emergency generators, steam, thermal oil, compressed air.
Metal, rubber and fabric expansion joints decouple vibrations and absorb thermal expansion. For quiet, leak-tight and durable pipework.
- Applications: Power plants, chemical plants/refineries, HVAC, marine, turbine/boiler lines, pump/compressor connections.
- Variants: Axial, lateral, angular, universal (with tie rods), multi-convolution; internal sleeve (liner) optional; materials e.g. 1.4571/1.4404, PTFE/elastomer and fabric layers.
- Standards: Design to EJMA; selection by medium, temperature, pressure and movement.
Exhaust silencers for combined heat and power (CHP) plants and emergency generators, matched to the connection dimensions of your plant.
Use: Exhaust lines of gas and diesel engines in CHP plants and emergency generators.
Design: Matched to engine output, exhaust gas flow and required attenuation.
Quotation: Send the data sheet or dimensions of your existing silencer and we will prepare a quotation.
Variants: Filter elements equivalent to the original; knitted mesh sleeves with or without glass fibre; knitted stainless steel tapes.
Use: Hydraulics and lubrication, manufacturers of particulate filters, engines and plants.
Quotation: Send the OEM part number and annual requirement and we will prepare a quotation.
Knitted wire mesh separator inserts remove fine liquid droplets from gases and vapours.
Construction: Stainless steel mesh, also co-knitted with glass fibre, PTFE or polypropylene, made to the dimensions of your separator.
Use: Fine droplets in gases, oil-water separation, compressors, exhaust air and process plants.
Quotation: Send the dimensions or a photo of the existing insert and we will prepare a quotation.
Replacement catalysts for gas engines in CHP plants, made to size or to sample.
Construction: Oxidation catalysts made to the dimensions of your existing catalyst.
Use: CHP plants and stationary gas engines.
Quotation: Send the nameplate details, dimensions or a photo and we will prepare a quotation.
Variants: DN 10 to DN 1200, PN 2.5 to PN 40; steel S235JR and P265GH, stainless steel 1.4541 and 1.4571.
Standards: EN 1092-1, inspection certificate 3.1 to EN 10204 on request.
Use: Exhaust lines and pipelines, expansion joints, metal hoses, plant engineering.
Linear solenoids and stop solenoids for valves, interlocks and engines.
Applications: Valves, interlocks, shutdown of diesel and gas engines.
Design: Matched to force, stroke, duty cycle, voltage and IP rating.
Quotation: Send the nameplate details or data sheet of the existing solenoid and we will prepare a quotation.
Applications: Demisters/mist eliminators, filtration/de-misting, vibration/shock damping, EMI/RFI shielding.
Properties: Large surface area, low pressure drop, corrosion-resistant alloys.
Forms: Pads, roll stock, made-up inserts, sealing profiles.
Variants: DN 6 to DN 300, with or without braid, up to 550 °C; flange, threaded or weld connection.
Testing: Pressure and leak test before delivery, certificate to EN 10204 on request.
Use: CHP plants, emergency generators, steam, thermal oil, compressed air.
How ordering works
with Eurolog
From enquiry to delivery. Every step has one aim: you get the right part with no unnecessary steps.
You send us a photo of the nameplate, a drawing or a data sheet. If anything is missing, we ask.
We check material, standard and installation dimensions and clarify variants with the supplier.
Within 2 working days you receive a quotation or a question. After your order we confirm price and delivery date.
We order from the manufacturer, track the delivery date and let you know if anything changes.
We organise transport and handle customs clearance. You receive the tracking details.
We help with installation questions, complaints and repeat orders.
Enquiry
You send us a photo of the nameplate, a drawing or a data sheet. If anything is missing, we ask.
Technical review
We check material, standard and installation dimensions and clarify variants with the supplier.
Quotation and order
Within 2 working days you receive a quotation or a question. After your order we confirm price and delivery date.
Sourcing
We order from the manufacturer, track the delivery date and let you know if anything changes.
Logistics and customs
We organise transport and handle customs clearance. You receive the tracking details.
After delivery
We help with installation questions, complaints and repeat orders.
Luc Steffen
Managing Director, Eurolog GmbH
I handle every enquiry myself, from the drawing and the clarification with the supplier through to delivery. You can reach me by phone or email.
Which part are you looking for?
Send us your enquiry with a photo of the nameplate or a drawing. You will receive a reply within 2 working days.